Asked By: Bruce Roberts Date: created: Nov 21 2021

Are Kohler toilet tanks interchangeable

Answered By: Hugh Torres Date: created: Nov 23 2021

It should as long as the bolt pattern is the same.

Looking at the Kohler site, the flush valve and all attaching hardware has the same part numbers…so you should be good to go!.

Asked By: Louis Garcia Date: created: Nov 16 2020

Can you use any tank on a toilet

Answered By: Jeremiah Long Date: created: Nov 18 2020

Any tank should fit your bowl but you may have to adjust where it hangs on the wall and you may have to cut the supply line to the toilet bowl itself.

Asked By: Miles Torres Date: created: Oct 27 2021

What toilets do plumbers recommend

Answered By: Ronald Jones Date: created: Oct 28 2021

It is easy to install and easy to use, that’s why most plumbers recommend Toto Eco Ultramax toilet. American Standard Champion 4 is the best no clog toilet for long lasting use. It requires 1.6 GPF water to remove waste and clean the bowl.

Asked By: Alan Carter Date: created: Jan 30 2022

Do toilet seats fit all toilets

Answered By: Aaron Jackson Date: created: Jan 30 2022

No, not all toilet seats fit the same because toilets come in a variety of different shapes, so you’ll need to check yours before buying. … Most toilet seats are an oval shape, although some may be more of a contemporary square or D-shape.

Asked By: Hayden Carter Date: created: Aug 30 2021

Can you mix and match toilet bowls and tanks

Answered By: Bernard Taylor Date: created: Sep 02 2021

While there are a few models that can interchange tanks and bowls, most are configured to work optimally as a set as indicated in our Product Showcase. In fact, if you do your own mixing and matching, the toilet may not flush at all! Gravity Fed and Pressure Assisted tanks and bowls cannot be mixed.

Asked By: Carter Russell Date: created: Nov 30 2021

How wide is back of toilet

Answered By: Oliver Ross Date: created: Dec 02 2021

about 20 inchesThe general rule of thumb for standard toilet sizing is between 27 and 30 inches deep, the back height is usually between 21 to 31 inches and the width is about 20 inches.

Asked By: Mason Anderson Date: created: Nov 12 2020

Can you buy just a toilet tank lid

Answered By: Nicholas Parker Date: created: Nov 14 2020

Many stores out there do not sell individual lids and make you purchase a whole new set when all you need is simply a new cover. We have hundreds of wholesale replacement toilet tank lids to choose from. … If you need a new lid for your toilet, you will need a few simple items to help you find the right one.

Asked By: Lewis Jackson Date: created: Jul 03 2021

Will an elongated toilet replace a round toilet

Answered By: Morgan Ramirez Date: created: Jul 06 2021

An elongated bidet seat will still mount on a round toilet, as well as function just fine, but the aesthetics and comfort of the seat will be greatly diminished.

Asked By: Curtis Foster Date: created: Dec 19 2021

Are Caroma toilets any good

Answered By: David Hall Date: created: Dec 21 2021

Superb toilet cistern This is Caroma rimless toilet cistern is superb . Being a little higher, it is very comfortable. It is so easy to clean, flushes well and never seems to get those nasty ‘skid marks’. Highly recommended.

Asked By: Bernard Roberts Date: created: May 08 2021

How do you fix a toilet tank lid

Answered By: Kevin Henderson Date: created: May 09 2021

How to Repair a Toilet Tank LidRemove the broken toilet tank lid. … Arrange the broken pieces so that they fit together. … Pull the piece farthest to the left away from the lid. … Hold the pieces in place about 3 minutes for the glue to start bonding while they rest flat on the towel.More items…

Asked By: Timothy Baker Date: created: Nov 27 2021

Can I use a different toilet tank

Answered By: Patrick Turner Date: created: Nov 27 2021

It is unlikely that tanks will be interchangeable if you replace a toilet tank with one from a different manufacturer. Problems with mismatched tanks and bowls include hardware not lining up and poor balance on the bowl. Even if the bolts line up, the new tank may leak or be wobbly.

Asked By: Luke Wood Date: created: Apr 25 2021

How much should it cost to have a toilet installed

Answered By: Bryan Brooks Date: created: Apr 25 2021

On average, a standard toilet installation costs between $122 and $228 with most homeowners spending around $150 to $180. This does not include the price of the toilet which averages $99 to $199 for a total toilet replacement cost of $221 to $427. Get free estimates from plumbers near you.

Asked By: Harry Howard Date: created: Nov 15 2020

How do you measure for a new toilet tank

Answered By: Nathaniel Long Date: created: Nov 15 2020

A toilet tank’s height is measured from the floor to the top of the toilet tank. Place the end of the tape measure on the floor, and take the measurement at the very top edge of the tank lid. Toilet bowls and seats are either round or oval.

Asked By: Jose Simmons Date: created: Nov 02 2021

Are all toilet tanks standard size

Answered By: Timothy Brooks Date: created: Nov 04 2021

Tanks come in a few different sizes, and one of them is small. Small tanks vary in size; however, one standard length is 15 1/8 inches. It is common to see these tanks on toilets with bowls and seats of a similar size.

Asked By: Cameron Campbell Date: created: Oct 05 2021

Are toilet tanks universal fit

Answered By: Aaron Powell Date: created: Oct 07 2021

When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model.

Asked By: Andrew Alexander Date: created: Nov 17 2020

Is my toilet round or elongated

Answered By: Isaac Gonzales Date: created: Nov 20 2020

To determine if your toilet is round front or elongated, measure the distance between the center of the bolt holes(A) (which connect the seat to the bowl) out to the front rim of the toilet(B). If it measures approximately 16 1/2″ your toilet is a round front.

Asked By: Jason Thompson Date: created: Oct 30 2021

What should I look for when buying a new toilet

Answered By: Bruce Evans Date: created: Oct 31 2021

While there are many features to consider when buying a toilet, including height, bowl shape, color, style, and flushing technology, most toilets fall into one of two basic types: gravity-feed and pressure-assisted. Gravity-feed toilets dominate the market, but pressure-assisted models are worth a look.

Asked By: Dominic Adams Date: created: Nov 16 2021

Are all toilet tank covers the same size

Answered By: Ethan Wilson Date: created: Nov 17 2021

With some toilet models the tank lids simply will not fit well unless they are the exact same size. With some designs it isn’t that critical but with some it makes all the difference. It’s best that you order the exact sized replacement if at all possible.

Asked By: Benjamin Baker Date: created: Dec 12 2021

Are tenants responsible for toilet seats

Answered By: Christopher Ross Date: created: Dec 15 2021

Originally Answered: Will a landlord replace a toilet seat? Before occupancy if it is needing replacement sure that is minor enough if you asked. During occupancy most likely no, maybe they will if you supply it of say the tenant is older or not able to do much. but they shouldn’t have to pay for it.

Asked By: Graham Gonzalez Date: created: Apr 21 2021

What is the best toilet for the money

Answered By: Tyler Wright Date: created: Apr 23 2021

We’ve researched the best options on the market to find a toilet that suits your needs and budget.Best Overall: TOTO Ultramax II One-Piece Toilet Set. … Best Dual Flush: Glacier Bay Elongated All-in-One Toilet. … Best High-End: Kohler K-4007-0 San Souci Toilet. … Best Noiseless: Kohler K-3978-0 Wellworth Toilet.More items…•

Asked By: Blake Allen Date: created: Feb 02 2022

What toilet do I have

Answered By: Evan Campbell Date: created: Feb 05 2022

Look for the manufacturer name or a number on the bottom side of the water tank lid. It may be stamped into the lid or painted on – some of them may even be handwritten if the tank lid was replaced by a plumber with foresight.

Related Question Answers

Alejandro Long

Professional

Quick Answer: How Many Rolex Submariners Made Per Year?

800,000.The number of watches produced at Rolex every year (which is only known because Rolex has its movements certified by the official Swiss chronometer control center, COSC, and their numbers are public). Why are Rolex Submariners so expensive? The materials are very expensive. Rolex, for example, tends to use 904L steel which is leagues ahead of even most luxury market equivalents. They tend to use 316L steel. This makes them harder, shinier and also more expensive by default. Do Rolex keep their value? As they say in the business, most watches are like new cars and depreciate the minute you strap them on your wrist. But is this the case with every watch brand? Thankfully, no. Ask if Rolex watches can hold their value or even appreciate down the line and the answer is yes. What year did Rolex Submariner change? The Rolex Submariner 16610 was first introduced in 1989…

Seth Bell

Professional

Can You Paint Over Dried Paint?

How do you paint over already painted metal? Spray paint metal surfaces that have already been painted by first preparing the project, following these steps:Remove loose rust with a wire brush, sandpaper or chemical rust remover.Lightly sand the metal surface.Remove dust with a tack cloth.. How do you paint over peeling paint? Prep the Area. Old paint can chip, flake or peel, leaving behind cracks and small holes. ... Remove Peeling Paint. If you try to paint over peeling paint, you will not have a smooth, professional finish. ... Patch the Wall. ... Sand Patched Areas. ... Clean and Apply Primer. ... Wait until the primer is completely dry before repainting. What happens if you don't use primer before painting? Because it has a glue-like base, drywall primer helps the paint adhere properly. If you skip priming, you risk peeling paint, especially in humid conditions. Moreover, the lack of adhesion…

Francis Scott

Professional

How Long Do Ceramic Pans Last?

3 to 5 years Do ceramic pans need to be seasoned? Generally, ceramic cookware doesn't require seasoning. However, some products come with the instruction/recommendation to season the cookware prior to first use, and to re-season it about twice a year to revitalize ceramic non-stick surface. Make sure to rinse and dry your cookware before seasoning. How long do non stick pans last? three to five years Is ceramic cookware better than Teflon? In terms of ceramic vs Teflon cookware, the main difference lies in the composition of the non stick coating. Teflon is known to emit toxic fumes when it is heated up to a certain temperature. Ceramic coating, on the other hand, tends to be lead, cadmium, PFOA and PTFE free. Which is better ceramic or granite cookware? Today granite cookware and granite pans are made with a stainless steel core and topped with a glass coating. Most granite…

Norman Moore

Professional

Question: Is Ceramic Harder Than Glass?

In theory, ceramic is stronger than glass.Glass is actually a type of ceramic, but to be specific, glass has no ordered molecular structure.Most modern ceramics have a crystalline molecular structure.Typically ceramic is stronger than glass of the same thickness, and more resistance to heat and thermal changes.3 Feb 2016 Is ceramic more durable than glass? Ceramic is lighter than glass, but usually because it is porous. One of the big benefits of ceramic over class is that ceramic is a good thermal insulator due to its porosity.6 Nov 2009 What's the difference between glass and ceramic? In the manufacture of both glass and ceramics, there is a slight difference. A glass kiln will have heating elements on the top whereas a ceramic kiln will have heating elements on the sides. Glass is known to be non-crystalline. Ceramics may be crystalline or partly crystalline.11 Jun 2017 Is ceramic easily breakable? Ceramics…

Gavin Cooper

Professional

Question: Are Ceramic Watches Good?

Apart from being scratch resistant, high-tech watch ceramic is very lightweight, heat-resistant and anti-allergic.Its sleek surface offers a unique feel on the wrist that is both cool and smooth.This is a highly time intensive manufacturing method which makes high-tech watch ceramic so valuable. Why ceramic watches are expensive? Machining is generally very hard to do for most ceramics. The raw materials to make ceramic parts is cheap, but the process to make them is expensive. Metals are often the other way around, with precious metal materials being expensive, but the process used to machine them being less expensive. Does ceramic watch break easily? Potentially Brittle While ceramic is extremely durable and can resist scratches and common damages, due to the molecular structure it is not resistant to shattering. If a ceramic case falls onto a hard surface from a few feet or more, there is a good chance that it…

Daniel Ross

Guest

Quick Answer: Does Gold Scratch Easily?

Despite being stronger and more durable, platinum is a softer metal than 14k gold.This means it will get scratched a little easier than 14k gold would.However, an important thing to note is when gold is scratched, the gold is lost and it looks like a scratch. Does 10k gold scratch easily? As a result of its hardness, 10K gold jewelry is very durable, relatively speaking. In comparison, alloys such as 18K or 20K gold scratch much more easily, and jewelry made with them is easier to bend. Click here to see an extensive selection of 10K gold jewelry. Does 18k gold scratch easily? You won't usually find gold rings beyond 18K because they tend to get scratches and deformations way too easily. Obviously, 18K gold is the most expensive, but it's also the one that's least likely to tarnish. It is, however, more prone to being affected by every-day use…

Richard Robinson

Guest

Question: Does Rolex Scratch Easily?

Unlike other highly mechanical, high-end watches, Rolex is designed to take everyday beating, watch case, crystal and all.Scratches and wristwatches are a fact of life.Rolex gold, platinum, and 904L stainless steel does scratch with day-to-day use. Are Rolex scratch resistant? Without question, Rolex watches are know for being one of the most durable mechanical timepieces made. Rolex utilizes 904L stainless steel that is highly polishable and scratch resistant, but scratches do happen. Does Rolex face scratch? Acrylic has its advantages. It is very durable, easily resisting bangs. However, it is not scratch resistant, thus those bangs can still leave a mark. Rolex used acrylic in their watches, but slowly began introducing a synthetic sapphire replacement similar to the one in the image above. How do I prevent scratches on my watch? 0:41 1:28 Suggested clip · 40 seconds How To Stop Scratching Up Your Watch !! - YouTube YouTube Start…

Noah Jones

Guest

Question: Is Glass Harder Than Ceramic?

In theory, ceramic is stronger than glass.Glass is actually a type of ceramic, but to be specific, glass has no ordered molecular structure.Most modern ceramics have a crystalline molecular structure.Typically ceramic is stronger than glass of the same thickness, and more resistance to heat and thermal changes. Is Glass considered a ceramic? A ceramic material is an inorganic, non-metallic, often crystalline oxide, nitride or carbide material. Some elements, such as carbon or silicon, may be considered ceramics. Glass is often not considered a ceramic because of its amorphous (noncrystalline) character. Is ceramic easily breakable? Ceramics are brittle because they're loaded with irregularly distributed pores. Some ceramics, like bricks, have large pores. “The larger the pore, the easier it is to break,” Greer says. If you've ever broken a ceramic vase or some such, the break probably originated at a pore. What is the hardest ceramic? The technical properties of silicon…

Bryan King

Guest

Question: Does Ceramic Break Easily?

The rub with ceramics is that, while they're tough to scratch, they're* *more prone to cracking compared to metal.Some ceramics, like bricks, have large pores.“The larger the pore, the easier it is to break,” Greer says.If you've ever broken a ceramic vase or some such, the break probably originated at a pore. Does ceramic watch break easily? Potentially Brittle While ceramic is extremely durable and can resist scratches and common damages, due to the molecular structure it is not resistant to shattering. If a ceramic case falls onto a hard surface from a few feet or more, there is a good chance that it may shatter. Why do ceramics break easily? But, in ceramics, due to the combined ionic and covalent bonding mechanism, the particles cannot shift easily. The ceramic breaks when too much force is applied, and the work done in breaking the bonds creates new surfaces upon cracking.…

Simon Simmons

Guest

Quick Answer: What Is A Rolex Hulk?

Rolex Hulk Nickname Origin: Introduced in 2010 to commemorate the 60th anniversary of Rolex's legendary dive watch, the "Hulk" marks the first time in Rolex history that the Submariner has been offered with any dial color other than black or blue. What is a Rolex Kermit? Presenting the 50th Anniversary Rolex Submariner 16610LV, also known as the Kermit Rolex watch. The Kermit Rolex model is a Rolex Green Submariner that was released in 2003, in celebration of the Rolex Submariner's 50th Anniversary. Is it worth buying a Rolex? So in short, yes, a rolex can be worth it. Remember its not an investment. If you want your $9000 to grow steadily in value then you are far better off finding some good long term growth shares with healthy dividend returns etc. Rolex is not an appreciating asset unless you are buying a rare antique. Why are Rolex Submariners so expensive?…

Jeremiah Watson

Professor

Quick Answer: Why Are Rolex So Expensive?

The materials are very expensive.Rolex, for example, tends to use 904L steel which is leagues ahead of even most luxury market equivalents.They tend to use 316L steel.This makes them harder, shinier and also more expensive by default. Is buying a Rolex worth it? So in short, yes, a rolex can be worth it. Remember its not an investment. If you want your $9000 to grow steadily in value then you are far better off finding some good long term growth shares with healthy dividend returns etc. Rolex is not an appreciating asset unless you are buying a rare antique. Why are watches so expensive? Some have a price tag which can seem high, but which is justified for a number of reasons. Generally speaking, because of the nature of their movements, mechanical watches are more expensive than quartz watches. The production of quartz or mechanical movements is at the cutting-edge…

Dominic Garcia

Professor

Question: Is Ceramic Scratch Resistant?

The ceramic retains the color and is scratch-resistant; this means the bezel will always keep its “brand new” look.Ceramic is one of the hardest class of materials known meaning that engineering the material is extremely hard.On the other hand, because it is so tough, it's difficult to scratch. Does ceramic break easily? Ceramics are brittle because they're loaded with irregularly distributed pores. Some ceramics, like bricks, have large pores. “The larger the pore, the easier it is to break,” Greer says. If you've ever broken a ceramic vase or some such, the break probably originated at a pore. Is ceramic expensive? Machining is generally very hard to do for most ceramics. It is perfectly normal that a ceramic case is more expensive than a steel or even titanium case. However, it will not likely exceed the cost of a gold or platinum case, as the materials used are not that…

Carlos Robinson

Professor

Quick Answer: How Durable Is A Ceramic Watch?

Apart from being scratch resistant, high-tech watch ceramic is very lightweight, heat-resistant and anti-allergic.Its sleek surface offers a unique feel on the wrist that is both cool and smooth.Ceramic watches are durable and very versatile in shiny metallic colours with smooth or ornate surfaces. Why is ceramic watch so expensive? Machining is generally very hard to do for most ceramics. The raw materials to make ceramic parts is cheap, but the process to make them is expensive. Metals are often the other way around, with precious metal materials being expensive, but the process used to machine them being less expensive. Does ceramic break easily? Ceramics are brittle because they're loaded with irregularly distributed pores. Some ceramics, like bricks, have large pores. “The larger the pore, the easier it is to break,” Greer says. If you've ever broken a ceramic vase or some such, the break probably originated at a pore.…

Samuel Hall

Professor

Quick Answer: Are Ceramics Expensive?

How do you price ceramics? Suggested clip · 55 seconds How to PRICE your pottery..or ANYTHING!!!!- YouTube YouTube Start of suggested clip End of suggested clip Is ceramic expensive? Machining is generally very hard to do for most ceramics. It is perfectly normal that a ceramic case is more expensive than a steel or even titanium case. However, it will not likely exceed the cost of a gold or platinum case, as the materials used are not that precious. How much does a pottery class cost? General Cost Lessons in pottery vary in cost between the level of tuition you require and the standard of the teaching, and also the location. For a basic beginners lesson you can expect to pay between $10 and $30, usually as part of a longer course. What is the difference between pottery and ceramics? With this you will definitely distinguish the difference between the…

Anthony Hall

Professor

Quick Answer: Is Ceramic Stronger Than Steel?

Strength (1) A material's hardness is determined by measuring the size of an indentation made by a sharp diamond pressed strongly onto a material specimen.The hardness of alumina ceramics is nearly three times that of stainless steel; silicon carbide is more than four times harder than stainless steel. Is ceramic strong? A ceramic material is an inorganic, non-metallic, often crystalline oxide, nitride or carbide material. Some elements, such as carbon or silicon, may be considered ceramics. Ceramic materials are brittle, hard, strong in compression, and weak in shearing and tension. What is the strongest type of steel? What Is the Strongest Non-Alloy Metal in the World? Tungsten has the highest tensile strength of any natural metal, but it's brittle and tends to shatter on impact.Titanium has a tensile strength of 63,000 PSI. Chromium, on the Mohs scale for hardness, is the hardest metal around. Are ceramics tougher than metals? The…

Jack Jenkins

User

Quick Answer: Is Ceramic Breakable?

Ceramic and porcelain are two materials that are strong and smooth, but breakable.It is a type of ceramic, but its clay makes it denser and more durable.Its clay is white and very refined.Though the two are very similar, porcelain tends to be more expensive than ceramic. Is ceramic easily breakable? Ceramics are brittle because they're loaded with irregularly distributed pores. Some ceramics, like bricks, have large pores. “The larger the pore, the easier it is to break,” Greer says. If you've ever broken a ceramic vase or some such, the break probably originated at a pore. Is ceramic strong? A ceramic material is an inorganic, non-metallic, often crystalline oxide, nitride or carbide material. Some elements, such as carbon or silicon, may be considered ceramics. Ceramic materials are brittle, hard, strong in compression, and weak in shearing and tension. Are ceramics brittle? The two most common chemical bonds for ceramic materials…

Aidan Jones

User

Quick Answer: Can Ceramic Scratch Metal?

Ceramics, on the other hand, are virtually scratch-proof.Unlike an aluminum or a stainless steel case, a ceramic one can take a licking and keep on ticking.The rub with ceramics is that, while they're tough to scratch, they're* *more prone to cracking compared to metal. Can you scratch ceramic? The ceramic retains the color and is scratch-resistant; this means the bezel will always keep its “brand new” look. Ceramic is one of the hardest class of materials known meaning that engineering the material is extremely hard. On the other hand, because it is so tough, it's difficult to scratch. Is ceramic harder than steel? A material's hardness is determined by measuring the size of an indentation made by a sharp diamond pressed strongly onto a material specimen. The hardness of alumina ceramics is nearly three times that of stainless steel; silicon carbide is more than four times harder than stainless steel.…

Nathaniel Watson

User

Question: Are Ceramic Bezels Scratch Proof?

The ceramic retains the color and is scratch-resistant; this means the bezel will always keep its “brand new” look. How durable is a ceramic watch? High-tech ceramic is really a material with unique properties. Apart from being scratch resistant, high-tech watch ceramic is very lightweight, heat-resistant and anti-allergic. Ceramic watches are durable and very versatile in shiny metallic colours with smooth or ornate surfaces. Can Rolex face scratch? Acrylic has its advantages. It is very durable, easily resisting bangs. However, it is not scratch resistant, thus those bangs can still leave a mark. As you can see from the image above, an acrylic crystal can gather many scratches, especially one worn often. Why are ceramic watches so expensive? Machining is generally very hard to do for most ceramics. The raw materials to make ceramic parts is cheap, but the process to make them is expensive. Metals are often the other…

Charles Williams

User

Quick Answer: Can Rolex Face Scratch?

How do I prevent scratches on my watch? 0:41 1:28 Suggested clip · 40 seconds How To Stop Scratching Up Your Watch !!- YouTube YouTube Start of suggested clip End of suggested clip Can scratches on stainless steel watch be buffed? Continue to rub the scratches until they disappear. Apply more metal polish to the pad or cloth as needed. When you're done with one area, move down the watch band to the next section. When you're finished, use a clean cloth to buff the stainless steel to a shine. What is the face of a Rolex made of? Steel comes in various types and grades and most steel watches are made from a type of stainless steel called 316L. Today, all the steel in Rolex watches is made from 904L steel, and as far as we know, pretty much no one else does. Is it possible to scratch sapphire…

Bernard Moore

User

Is Ceramic Harder Than Stainless Steel?

Strength (1) The hardness of alumina ceramics is nearly three times that of stainless steel; silicon carbide is more than four times harder than stainless steel.This extreme hardness is one of many unique properties that makes Fine Ceramics "super materials" for modern technology. Are ceramic knives better than metal? The blade is sharpened so thin that anything hard may chip your ceramic knife. The knife you choose will come down to your own needs; ceramic knives are not as versatile as steel and they do not make a good all-purpose knife, however, they are excellent at slicing fruits and vegetables thinly. Is ceramic harder than titanium? Tungsten is about 10 times harder than 18K Gold, 5 times harder than tool steel, and 4 times harder than titanium. Tungsten measures between 8 and 9 on the Mohs hardness scale. (Diamonds are a 10 - the highest.) Tungsten, though very hard, is…