What Type Of Water Softener Resin Do I Need?

Water Softener Resin 8% – This is high quality water softener resin.

Get 1/2 a cubic foot (.

5 cuft) is a high-capacity, bead-form, standard gel polystyrene sulphonate cation exchange resin ready for any water softener.

It eliminates hardness ions like calcium and magnesium, changing them with sodium ions..

How much does water softener resin cost?

Water Softener Resin Replacement Cost Water softener resin replacement costs $200 to $400 on average. If yellow resin fragments are getting into the home, the bottom distributor also needs to be replaced.

What is the average lifespan of a water softener?

Water softeners can last 10 to 20 years, depending on the type and quality you buy. On average, a single tank electric water softener could last you up to 12 years, while a Kinetico system can last as many as 20 years.

Are water softener resin beads toxic?

Well, do not be too alarmed, those yellow beads are not toxic, but they do clog up the smaller passages in fixtures and appliances. You should get your plumbing work inspected to have all of these resin beads thoroughly flushed out of your plumbing system.

Can water softener resin dry out?

A lot of resin specification sheets warn about allowing resins to dry out. Again, this is way overrated. Yes, if resin is put in an oven and all the water is baked out of it, it will shrink to about half its regular size. When a user goes to re-wet it, the resin will swell suddenly and probably break.

What does the resin do in a water softener?

Water softening is a process in which water flows through a bed of resin to exchange the hardness ions, calcium and magnesium, for sodium ions. When the resin has reached its capacity for holding hardness ions, the water softener initiates a regeneration cycle.

How do I choose a water softener resin?

The ion exchange resin is the media that actually softens your water and so the quality of the resin inside your softener will in large part determine the life expectancy of the softener. So, what type of resin should you choose? Answer: In short, we recommend using the High Capacity 8% Cross Link Resin.

What kind of resin is used in water softener?

polystyrene divinyl benzeneThe resin in most modern softeners (polystyrene divinyl benzene) consists of millions of tiny plastic beads, all of which are negatively charged exchange sites. The ions considered in this process (calcium, magnesium and sodium) are all positivly charged ions.

How much resin do I need in my water softener?

Depending on its size, the amount of resin should be anywhere from 0.64 to 2.00 cubic feet. When you get the amount right, you eliminate one potential source of water softener problem.

How often should you change the resin in a water softener?

every 10 yearsWater softener resin will usually need to be replaced every 10 years. Resin that’s exposed to high levels of chlorine, iron, or water hardness will only last around 5 years.

Why is softened water slippery?

Soft water replaces those magnesium and calcium ions with sodium ions. The result is soft water, loaded with salt. The salt is what makes the water feel slimy. After you buy a water softener, you might feel slimy and slippery after you take a shower, like you haven’t gotten all the soap off of you.

How do I dispose of water softener resin beads?

You need to put the resin in a separate bag, then dump the bag in your trash. The bag holds the resin beads together to avoid spilling. Also, refrain from flushing the beads down your toilet.

What is the best resin for water softeners?

Best Water Softener ResinPurolite SST-60 Resin.Tier1 Ion Exchange Resin.Nelsen Cation Resin.AFWFilters High Capacity Resin.Aquatrol Water Softening Resin Softener Media.LiquaGen Ion Exchange Resin.Feb 20, 2021

What is the difference between 8% and 10% resin?

Most softening resin have 8% crosslinks and some specialty specialty resins have 10% or higher. Most people would use the 8% resin. The 10% crosslink resins have a little better strength and last a little longer in chlorinated water. … Since there are more strings, the resin holds together a bit longer.

Is fine mesh resin better?

Mesh size refers to the dimensions of the individual resin beads. The finer the mesh size, the smaller the beads. Smaller beads can pack together more tightly so, for a given volume of resin, fine mesh will offer more ion-exchange surface area and will do more softening.

Why resin is used in water?

Hardness removal SAC resin is effective for water softening, which removes hardness ions. It has been used in residential, commercial and industrial applications for more than 100 years. Like tiny magnets, SAC resin beads remove scale-forming calcium (Ca2+) and magnesium (Mg2+) ions by exchanging them for sodium ions.

How long does Resin last in water softener?

10 to 15 yearsIf your water softener doesn’t put out any soft water or it regenerates and runs out of soft water quickly (in just a day or so), you probably have a damaged “resin bed.” A water softener resin bed normally lasts 10 to 15 years.

Do you need gravel in water softener?

Gravel below bedding is an essential part of your water softening method as it promotes correct flow and water distribution. It’ll also maintain the quality of treated water in softeners, filters, and more. It is suggested to have 3″ layers of gravel in graded assistance beds.

Do all water softeners have resin?

Most modern water softeners use 8% crosslink resin. A few High Performance Water Softeners use 10% crosslink resin, which has more “links in the chain” to increase durability.